How To Patch A Leaky Pipe While You Wait for The Plumber

By Thornton Plumbing and Heating

Share This Post

So, you’ve seen the telltale indicators of a leaking pipe in your house in Salt Lake City. You’ve called a plumber who specializes in water leak repair emergencies. But, until they come, what should you do?

Leaving a pipe or hot water tank to leak might be harmful to your ground or walls and a fungus issue. While you wait for your plumbers, you’ll need to (at least try to) fix the leak.

Locate the Leak’s Origin

Locate the Leak's Origin

Some leaks are more difficult to locate than others. If a water level under your sink, for instance, is leaking, you can instantly spot it.

The majority of your toilet plumbing, on the other hand, is hidden behind the wall or beneath the floor. Consider a toilet that is leaking. The line going to the toilet tank may be leaking toilet water.

Sadly, water in the restroom could be caused by a damaged bowl or a broken wax ring. Hidden-source leaks are far more difficult to detect and require the assistance of a specialist.

Are you able to get to the pipe?

If you can pinpoint the leak’s location, check if you can gain access to the pipeline. If you can, it’s a strong choice for a short-term fix. If not, you’ll do something else in the meantime to halt the leak.

Stopping a leak without a fix usually entails turning off the water till a plumber specializing in leak repair reaches.

If you have a burst water tap, the best option is to turn off the flow. In that situation, you can turn off the water by accessing the shut-off valves beneath your sink.

You’ll be able to stop the irritating leak without cutting off the entire water supply to the house, and you’ll be able to turn the tap back on as required. This workaround allows you to continue using your home’s pipes as usual.

The pipe should be cleaned and dried

The pipe should be cleaned and dried

Assuming you’ve found the leak and have access to the pipe, you’ll need to cleanse and dry it. To do so, locate the nearest shut-off valve and turn it off. After that, turn on the closest faucet to flush out any water accumulated in the pipe.

Now, wash the pipe with a cloth to create a dry work area. Use this time to wipe off the floor and walls, ensuring that they are dry. When your plumber arrives, they will enjoy a clean, safe work environment.

Tighten the Links

Tighten the Links

Check for any loose connections in the area and tighten them up. You’ll need a fine adjustment for this. Tightening the patch creates a better seal, which can improve its effectiveness.

Preparing the Pipe’s Surface

If you put a patch on a tube with a hard, uneven pavement, it will not work very well. There could be rust or traces of a prior patch on the line. You can smooth things up with some sandpaper.

Pick your Patch

When it concerns repairing a leak while you are waiting for a pipe or water faucet to be repaired, you have many options. Here are a few ideas to get you started:

Tape for plumbing repairs

Tape for plumbing repairs

Tape is a simple and low-cost option. It is, however, just transitory. Plumbing repair tape is available at your local hardware shop. Follow the package’s instructions after that. Keep in mind that this remedy will only last a few days.

Epoxy

Epoxy is a powdered epoxy resin that comes in a container. Plumber’s putty is another name for it. Epoxy repair kits may include two tubes or jars of substance that must be mixed before applying to the pipe. Follow the package recommendations to address minor leakage in short to medium term.

Clamp for Plumbing Repair

A pipe clamp is a low-cost option that is sometimes ignored. Simple metal clamps with rubberized padding on the inside are plumbing clamps.

The clamp is placed over the leak with the rubber concealing it. The clamp is then tightened with the given screws. The rubber will cover the hole if applied appropriately, preventing further leakage for the time being.

Sleeve Repair

A repair sleeve is comparable to a repair clamp. However, it’s a sleeve instead of a clamp. A sleeve isn’t meant to fit around a leaking pipe; it’s meant to glide over it.

The homeowner may find this difficult because it includes disconnecting the leaking pipe, sliding on the repairing sleeve, and reconnecting the plumbing. These, on the other hand, come in large sufficient sizes to repair a sewer line or a main water leak.

Patches are temporary fixes.

A patch can be highly effective if applied appropriately. You may be tempted to utilize this as a long-term solution. Regrettably, this is not a good idea. A pipe fracture or hole might enlarge with time, causing a leak larger than your patch can manage.

Instead, think of this as a stopgap measure until a professional plumber arrives.

Immediate Leak Repair by Advanced Plumbing and Drains

Check Superior Plumbing and Drains before looking for “water leak repair near me.” We’ve been serving Charlotte, NC, for over 30 years and provide emergency services to safeguard your property from the consequences of leaky pipes.

Do you have a leaking pipe in your home? For assistance, please get in touch with us. We’ll dispatch a specialist right away!

More To Explore

We can HELP you solve your Plumbing, Radiant, Snowmelt, and Boiler Services

For a limited time only!

Get $75 off a New Water Heater

Let us install your water heater. Our licensed, insured pros can handle it.

Signup now to get our Water Heater Special our calendar is filling up fast. Feel free to call us if you have any questions 801-565-7948.

WElsome