Job Listings

We currently don’t have any jobs available. Please check back regularly, as we frequently post new jobs. In the meantime, you can also send through your résumé, which we’ll keep on file.

If you think the rain may harm your plumbing in Salt Lake City, the short answer is yes. It can be problematic. This is particularly the case if there hasn’t been any rain in a long time and the earth is extremely dry. While dry earth may absorb water better, this is not the case.

When it rains, one of the most serious problems your plumbing may encounter is too much rainwater in a short period. Let’s look at even the most prevalent plumbing problems that occur when it rains:

Flooding

Flooding

The earth cannot receive the water when there is a lot of rain in a short period after a dry season. This indicates that it is sitting on the ground and should be directed to the closest drain.

If the water is running too quickly for the drain to manage or if the drain is stopped, the water will pool and seek another way out.

In many circumstances, the most obvious one is your home. In other words, if the rain is hard enough and the pipes can’t manage it, water will likely enter your property, ultimately flooding it. That will necessitate a call to an urgent plumber and contact Thornton Plumbing and Heating to ensure flood damage is covered.

Even if it doesn’t penetrate your home, it will leave pools of water in your yard, which will cause harm. They can also make getting around tough for you.

The Water Is Backing Up In The Pipes

The Water Is Backing Up In The Pipes

When it rains, the waterfalls to the ground and is absorbed by the drainage network. It is taken away by the pipelines, recovered and used to supply water to homes.

On the other hand, heavy rains might sweep sticks, twigs, and other material into the drains, clogging them. The wastewater in the pipes will subsequently be prevented from accessing the main sewers. It will accumulate, and water will eventually leak from the toilet, shower, and even the sink.

It’s worth noting that this won’t happen when it’s raining; the clog will take time to build up and entirely stop the pipes. However, you will notice that water drains from appliances considerably slower. This indicates a problem that may or may not be related to the recent heavy downpour.

Pipe Breakage

Pipe Breakage

Broken pipes are another major issue. In a short period, heavy rain pours a significant amount of water into the pipelines. This puts more strain on the pipe’s walls, which might cause them to rupture or split. As a result, wastewater will start collecting in your yard beneath the soil.

It might cause obstructions and pour water onto your property. There will also be a distinct odor in the yard, and sections of grass near the damaged pipe will be doing better than the rest.

It’s important to remember that severe rain can damage your water lines, particularly if they’re old. Heavy rain will collect in a puddle and may clog a supply pipe. The greater the volume of the water, the greater the pressure on the pipe. It’s not uncommon for old or broken pipes to split and leak.

There will be a decline in water pressure and possibly water pouring from the leak. That depends on the location of the leak. The only method to fix the problem is to turn off the water and replace the pipe’s broken part.

Having a Plan

You might believe that you don’t get enough rainfall to worry about this problem. Sadly, because you are unprepared, it is more likely to occur.

The greatest part you can do is inspect the age and quality of your pipelines. Supply pipes can be visually checked and force confirmed, while waste pipes can be visually inspected and tested using a sewer camera. Any problems should be discovered and resolved as soon as possible to avoid a problem when it rains.

Therefore, you should check all drainage points to verify that the pipes are clear of obstructions. These can clog drains and are especially likely to be a problem during heavy rain.

Finally, if you’re unsure, it’s better to call a plumber today than to have to dry up your flooded home tomorrow.

Leave a Reply

Your email address will not be published.

A service technician should maintain your water heater on a routine basis in Salt Lake City. This annual maintenance allows you to respond swiftly and eliminate potential concerns. However, a rusted bottom on a tank’s water heater is one problem.

Rust can form in your hot water tank areas and weak linkages. However, rusting on the base of your water heater’s tank could indicate a more serious issue. We recommend consulting a specialist like Thornton Plumbing and Heating to determine if the tank’s internal lining has corroded. It is a trustworthy and reliable service. This occurs when the anode rod breaks. The anode rod pushes contaminants from the water when it works normally.

When the hot water system tank starts to rust, it’s better to upgrade it. If the container breaks, you risk getting your house soaked with water.

Here are some more signs that your hot water tank is on its last legs.

4 Indicators That Show It’s Time to Replace Your Water Heater

4 Indicators That Show It's Time to Replace Your Water Heater

Although your hot water tank cannot predict when it will break, these are warning indicators that it is about to do so.

1. Older

A good water heater should last roughly ten years. Even though it’s still in good repair, if this one is near this age or older, it’s a matter of looking into changing it. If the container breaks, you won’t have the hot water, which could lead to a serious problem.

2. Dirty Waters 

This indicates that the tank of your hot water system is eroding. Your detergent may feel odd or stain things whenever you clean the clothing. While rust is not dangerous, it can affect your water quality and discolor your plumbing fixtures.

3. Hot Tap Limitations

Even when bathing and washing clothes simultaneously, your hot water tank should provide enough heated water. If it’s suffering even with occasional usage, it’s time for a replacement.

4. Strange Noises

Whenever the anode rod in your heater breaks, silt accumulates in the container. Your water heater will have to put more effort into heating the water. This may cause pounding or knocking noises and higher energy expenses.

Leave a Reply

Your email address will not be published.

The possibility of a leak coming from the water heater is one of those issues that many homeowners don’t give much thought to In Salt Lake City and Park City.

Many of us are susceptible to falling into the “out of sight, out of mind” trap since the water heater is frequently situated in a part of the home that its inhabitants never visit. When the issue with the water heater gets so glaringly clear that we can no longer ignore it, we realize there is a problem. It may be too late to stop major harm from being done to your home by that point.

What Could Be Causing Your Water Heater to Spill Its Contents?

What Could Be Causing Your Water Heater to Spill Its Contents?

Let’s start by looking at why water heaters tend to leak. The fact that water heaters can spring a leak for various reasons is probably not going to come as much of a surprise to you.

Gradual Aging

Water heaters are prone to the degrading effects of aging much like any other piece of household equipment, including every other appliance in your house. On the other hand, these water heaters might be quite resilient compared to many other appliances.

Even if you rarely do anything to care for them, they can continue to operate without difficulty for up to ten years, and this is true even if you don’t do much of anything to keep them maintained.

Nevertheless, ten years might pass in the blink of an eye, and you may forget how old your heater is. If an appliance starts acting up, it might be worth your time to look at the receipt that came with it and determine the precise date you bought it. That might shed some light on why it’s behaving strangely.

The Inlets and Outlets for Warm and Cold Air

When compared to the water heater’s other components, the hot and cold inlets and outlets are more likely to become damaged due to the location at which they are found on the device. If you’ve observed that your heater is starting to leak, you should check on these first.

The Valve for Relieving Both Temperature and Pressure

There is more than one possibility for why the temperature and pressure relief valve on your water heater is the source of the leak.

If the valve is subjected to excessive pressure, it can malfunction. One possible source of the issue is that the water heater is causing an excessive increase in the water’s temperature. This can cause the temperature and pressure relief valve to become damaged.

The Drainage Control Valve

You should anticipate that the drain valve would leak a little bit because it was meant to remove any silt that finds its way into the water heater. However, you should not expect it to leak significantly. On the other hand, there is a substantial disparity between a typical trickling sound and a full-blown water leak. Check to see that the drain valve is not letting out more water than it should, as this could develop into a significant issue much more quickly than you might expect.

The Reservoir of Water

Consider it a major issue if the tank itself is the cause of your water heater’s leaking problem. If this is the situation, you need to replace the tank. You won’t be able to fix that problem overnight, and it might require a significant financial investment. The only real advantage here is that you won’t just notice leaky water but rather floods, so you’ll know right away if there’s a problem with the water tank.

The Warning Indicators That Your Water Heater Is About to Spill Its Contents

There is a good probability that you will not discover a leak immediately away, particularly if your tank does not have a large hole. Regular inspection of your water heater is a good idea; nevertheless, most homeowners do not perform this task frequently enough.

The good news is that you do not need to do a comprehensive inspection of your water heater regularly to determine whether or not it is malfunctioning. It would be best if you were on the lookout for some of the signs of a faulty water heater, which we list below for your convenience.

The Water’s Quality Has Undergone a Shift

A significant number of people feel more refreshed after a morning shower with hot water. Some people can keep their bodies functioning properly even when exposed to extremely cold water early in the morning, while others cannot.

If the water heater produces a leak, you do not necessarily need to be concerned about being drenched in ice-cold water, but you may discover that the water seeping out is lukewarm rather than very hot.

There is a propensity to shrug off this anomaly and think of it as a byproduct of a cooler morning than usual, but it could be a sign that your water heater isn’t working right if it continues.

Examining the water to see if it contains any rust particles is another way to understand how efficiently your heater operates. You might already be aware of this problem because some of the garments you’re washing have developed rust spots suddenly.

The Water Heater Has a Rusted Appearance on Its Exterior

When we talk about rust, it’s important to note that you don’t have to find any in the water to know that your heater might have issues in the not-too-distant future. You might also check to see whether rust has begun to form on the exterior heater by inspecting it to see if it has been exposed to the elements.

The appearance of rust on the tank is a reasonably clear indicator that there is a leak someplace else in the system. Take the time to inspect the burner units, as they are also prone to rusting for the same reason.

The Water Heater Is Making A Significant Amount of Audible Noise

The water heater will inevitably become clogged with sediment over time. This silt will not make its presence felt for a significant time. However, the silt will harden and become a noise source anytime the water heater is in operation.

Listening to the heater is one possible solution to the problem of determining whether or not there is a problem with it.

The Area Around The Water Heater Is Beginning To Develop Puddles Of Water

If you start to notice that there are puddles of water accumulating around the heater, you should consider it an indication of a leak in the system. This is an apparent thing, but yes, you should take that as a hint. The pool of water that indicates a leak will almost always be located exactly under the heater. This is not always the case, though.

How to Repair a Faulty Electric Water Heater

How to Repair a Faulty Electric Water Heater

You are now aware of the symptoms, and you can identify that your water heater leaks. So, what steps should you take after that?

The following are some suggestions for addressing the leaky water heater issue in your home.

Locate Exactly Where the Water Is Getting In

Even though you are already aware that the water heater leaks, it is imperative that you keep in mind that there is not a single solution that works for all leaks, as was said before, the source of the leak could be a problem with the connections, the valves, or even the tank itself.

Finding the source of the leak should be your primary concern before making any repairs.

Find out where the water pools, remove them and then examine the area once more the next day to see whether any more water has accumulated there. That should point you in the direction of where a possible tank leak is.

Concerning the valves, nothing beats a careful inspection to determine whether or not they are all sealed or whether or not they are allowing water to seep out.

Put an End to the Power Supply and Empty the tank

After you have found that there is a leak and located the leak’s location, you should go ahead and turn off your water heater.

Using the circuit breaker box to turn off electric water heaters is a necessary safety precaution. Locate the circuit breaker that controls your water supply and turn it off. You must be careful because you should never put yourself in a situation where you could be lying in the water while some power is still flowing through the wires. This is a dangerous situation that should be avoided at all costs.

Turning off gas heaters is as simple as flicking the switch, making them more convenient

After successfully turning off the water heater, the next step is to drain the tank. You can do this when the heater has been turned off. To prevent your basement floor from becoming a riverbed, you should use a hose or a container to collect the water.

Pull the Plug on the Water Supply

As the tank is currently devoid of water, you are free to begin the process of turning off the water supply.

First, you should look for the valve that shuts off the cold water. You are free to turn off the valve on your own if you are assured that you won’t endanger yourself. That should be enough to stop any additional water from getting into the heater. If the valve that shuts off the cold-water supply to the heater is in a difficult-to-access location, you can instead focus on the main water valve in your home.

Take Action in the Problem Areas

Now comes the time for the actual repairs, which can be anywhere from quite easy to extremely difficult to complete depending on the nature of the damage. If the problem is associated with cold and hot water inlets and outputs, you may be able to fix it on your own.

Investigate the connections to determine whether or not there are any areas in which they are wobbly. Please take out your wrench and give it some more turns. If you do that, your problem with the leak will likely be resolved.

If your water heater’s valves are the source of its problems, fixing them won’t be as simple as you may hope. There may be an issue with the water pressure, but the problem could also be a damaged valve.

The Valve will need to be Replaced when Necessary

You could give it a shot on your own, but you can make things even more difficult if you don’t have the necessary experience. At this point, you should strongly consider making contact with the trained and experienced professionals that handle this kind of repair regularly.

Last but not least, if the tank has an existing hole that is significant in size, repairs may no longer be effective. You may need to invest in a new water heater at that time.

A Guide to the Upkeep of Your Water Heater

A Guide to the Upkeep of Your Water Heater

In the future, it is in your best interest to perform better maintenance on your water heater, and this is true regardless of whether you choose to fix your water heater or buy a new one entirely. Maintaining a water heater correctly is not a difficult undertaking to our great relief

Keeping a close eye on the anode, also known as the sacrificial rod, is something you should do. This part of the water heater is in charge of collecting any debris floating about inside the tank. Check up on that every so often to ensure that it is still operating.

After two to three years, you will likely need to replace it

If you want to make this appliance last for a longer period, there is another thing you need to do: flush the water tank of the heater. The method of flushing the tank is not a particularly complicated one. Perform this task on an annual basis to maintain the health of your water heater.

The Value of Preventative Maintenance for Your Water Heater

Maintenance is essential not only because it extends the life of your water heater but also because it enables the appliance to perform its function most effectively. When you take the time and effort to maintain the appliance, you get greater value for your money.

Investing time and energy into maintaining your home’s water heater can prevent costly damage to your basement.

The difficulty with the problems brought on by leakage is that they don’t always become apparent straight away. When you finally understand the problem, it may be too late to do anything about it, and you may be responsible for paying a significant amount of money for repairs.

Putting in the effort to maintain it can help you prevent paying for something that isn’t necessary.

Get in Touch with a Qualified Repair Team to Have Your Water Heater Issues Resolved

It is worth trying to fix the water heater by oneself; however, if the repairs get somewhat too complex, it may be essential to seek help from a professional. Get in touch with the experienced plumbers at Thornton Plumbing and Heating to resolve your water heater issues quickly and effectively. You can also reach them if you have any other concerns relating to plumbing that you would like them to address.

Leave a Reply

Your email address will not be published.

The water heater is among the most energy-intensive equipment in most houses in Salt Lake City, so it’s a smart spot to begin if you’re trying to save money on energy in water heating systems. Though, there are different things to consider before lowering the temperature on your water heater.

If you adjust the thermostat too low, your water heater could become a potential source for dangerous microorganisms. Raising it too high could result in a burning mishap.

How Low Are You Able To Go?

In a nutshell, it’s 120 degrees Fahrenheit. The U.S. Department of Energy suggests this level is the default thermostat range in most modern heating systems.

water heater setting

Bacteria that cause Legionnaires’ illness are stopped from increasing and may even be eliminated to this degree. Bacteria die off more quickly when the temperature is raised. As a result, other organizations, such as the Occupational Safety and Health Administration (OSHA), suggest a water heater setting of 140°F.

If someone in your house has a robust immunity, 120 degrees should be acceptable, but it’s also the basic minimum. If someone in the house has a weakened immunity, a range near 140 degrees is preferable. If you have dishwashing that does not create warmth, you may need to raise the temperature.

What Does Scalding Mean?

Water can inflict a third-degree burning in five seconds when heated to 140 ° f. You’ll never realize when the scalding liquid will arrive since it takes a few seconds for the water temperature to travel through your pipelines and meet your water tap or bathroom faucet.

Since kids’ skin is lighter than grownups’, they are more vulnerable to water burns, and the aged are also in danger due to impaired sensitivity, movement, and reaction time.

There is a cure to the tug-of-war between pathogenic and scalding protection: anti-scald faucets. You can maintain your water heater set to 140 degrees while ensuring that it never reaches hotter than 120 degrees at the faucet by fitting them at each point of contact with hot water. A skilled enthusiast plumber can construct an anti-scald valve as a Craft project. However, the job’s difficulty varies depending on the plumbing arrangement. If you have a difficult installation, consult a licensed plumber.

What About Energy Efficiency?

Reducing energy and money is vital, but it pales compared to protecting yourself and your household from potentially fatal diseases. However, you may save money without turning down your water heater’s temperature:

Make Use of Less Hot Water

Take shorter showers using the dishwasher instead of handwashing to save water.

Wrap your hot water system and pipelines in insulation

This may be an hour DIY job because there are pre-cut sections of insulating that are easy to set up.

Get A New Water Heater

The ordinary water heater will last 8 to 12 years if treated properly. Water heaters that are elderly or in need of repair may be less efficient than when they were first installed. When looking for a good option, opt for Thornton Plumbing and Heating for their water heating services.

Leave a Reply

Your email address will not be published.

A sewer backup is nearly every homeowner’s worst nightmare in Salt Lake City. All of the filthy waste from your septic system returns through the tubes and your home. Like it’s something out of a horror film. However, if you don’t properly maintain your septic system, you may be opening yourself up to a backlog. We’ll go over some of the most prevalent reasons for sewer blockages in this blog.  We’ll also cover some easy alternative solutions, though the best solution is to hire an expert.

A variety of factors cause sewer backups.

This part will look at some of the most typical causes of sewage backups and septic clogs. We want to point out that most of these issues are avoidable if you pay attention to treating your septic system.

COMMON CAUSE 1 CLOGS

COMMON CAUSE 1 CLOGS

It all boils down to what you’re throwing down your drains. Wet wipes, feminine products, and other non-waste things should be flushed. It also entails throwing bones, grease, lipids, or oil down the garbage disposal. Since these items aren’t easily broken up in your septic tank, they might cause blockages in your pipes and sewage tank. Clogs will ultimately cause obstructions, which will force waste back into the drains.

Common Cause 2 STRUCTURAL DAMAGE

Common Cause 2 STRUCTURAL DAMAGE

A variety of factors might cause significant damage to your sewer tank. Large plant roots surrounding your home are one way you can have structural difficulties. These massive roots have the potential to wreak havoc on the septic system. Large cars parked or driven on the sewer tank, particularly your drain field, can also cause significant damage. Finally, structural deterioration might occur simply due to ground movement over time.

Common Cause 3 FULL SEPTIC TANK

Common Cause 3 FULL SEPTIC TANK

If you haven’t emptied your septic tank enough, you can be having septic blockages. You should be concerned if you notice that you’ve used your pipes more than usual. During peak usage periods, such as Christmas, your septic tank may fill up faster than you expect. If your drainage system is overflowing, it may begin to back up into your house.

Sewer Backup Solutions in a Quick

Before we get into some simple treatments for sewer backups, keep in mind that they may often be avoided. You can help keep your septic system healthy by taking care of it and being cautious of what you throw down your drains. Here are a few quick solutions for you!

We hope that these fast recommendations and causes have provided you with a better understanding of sewage blockages and how to deal with them. The most important thing to remember is that sewer backups can be dangerous to your health, so if you’re having one, please get in touch with Thornton plumbing and heat for assistance. Our emergency assistance line is available 24 hours a day, seven days a week, 365 days a year. Our septic specialists will be able to assist you in dealing with the situation in a safe manner. 

Leave a Reply

Your email address will not be published.

So, you’ve seen the telltale indicators of a leaking pipe in your house in Salt Lake City. You’ve called a plumber who specializes in water leak repair emergencies. But, until they come, what should you do?

Leaving a pipe or hot water tank to leak might be harmful to your ground or walls and a fungus issue. While you wait for your plumbers, you’ll need to (at least try to) fix the leak.

Locate the Leak’s Origin

Locate the Leak's Origin

Some leaks are more difficult to locate than others. If a water level under your sink, for instance, is leaking, you can instantly spot it.

The majority of your toilet plumbing, on the other hand, is hidden behind the wall or beneath the floor. Consider a toilet that is leaking. The line going to the toilet tank may be leaking toilet water.

Sadly, water in the restroom could be caused by a damaged bowl or a broken wax ring. Hidden-source leaks are far more difficult to detect and require the assistance of a specialist.

Are you able to get to the pipe?

If you can pinpoint the leak’s location, check if you can gain access to the pipeline. If you can, it’s a strong choice for a short-term fix. If not, you’ll do something else in the meantime to halt the leak.

Stopping a leak without a fix usually entails turning off the water till a plumber specializing in leak repair reaches.

If you have a burst water tap, the best option is to turn off the flow. In that situation, you can turn off the water by accessing the shut-off valves beneath your sink.

You’ll be able to stop the irritating leak without cutting off the entire water supply to the house, and you’ll be able to turn the tap back on as required. This workaround allows you to continue using your home’s pipes as usual.

The pipe should be cleaned and dried

The pipe should be cleaned and dried

Assuming you’ve found the leak and have access to the pipe, you’ll need to cleanse and dry it. To do so, locate the nearest shut-off valve and turn it off. After that, turn on the closest faucet to flush out any water accumulated in the pipe.

Now, wash the pipe with a cloth to create a dry work area. Use this time to wipe off the floor and walls, ensuring that they are dry. When your plumber arrives, they will enjoy a clean, safe work environment.

Tighten the Links

Tighten the Links

Check for any loose connections in the area and tighten them up. You’ll need a fine adjustment for this. Tightening the patch creates a better seal, which can improve its effectiveness.

Preparing the Pipe’s Surface

If you put a patch on a tube with a hard, uneven pavement, it will not work very well. There could be rust or traces of a prior patch on the line. You can smooth things up with some sandpaper.

Pick your Patch

When it concerns repairing a leak while you are waiting for a pipe or water faucet to be repaired, you have many options. Here are a few ideas to get you started:

Tape for plumbing repairs

Tape for plumbing repairs

Tape is a simple and low-cost option. It is, however, just transitory. Plumbing repair tape is available at your local hardware shop. Follow the package’s instructions after that. Keep in mind that this remedy will only last a few days.

Epoxy

Epoxy is a powdered epoxy resin that comes in a container. Plumber’s putty is another name for it. Epoxy repair kits may include two tubes or jars of substance that must be mixed before applying to the pipe. Follow the package recommendations to address minor leakage in short to medium term.

Clamp for Plumbing Repair

A pipe clamp is a low-cost option that is sometimes ignored. Simple metal clamps with rubberized padding on the inside are plumbing clamps.

The clamp is placed over the leak with the rubber concealing it. The clamp is then tightened with the given screws. The rubber will cover the hole if applied appropriately, preventing further leakage for the time being.

Sleeve Repair

A repair sleeve is comparable to a repair clamp. However, it’s a sleeve instead of a clamp. A sleeve isn’t meant to fit around a leaking pipe; it’s meant to glide over it.

The homeowner may find this difficult because it includes disconnecting the leaking pipe, sliding on the repairing sleeve, and reconnecting the plumbing. These, on the other hand, come in large sufficient sizes to repair a sewer line or a main water leak.

Patches are temporary fixes.

A patch can be highly effective if applied appropriately. You may be tempted to utilize this as a long-term solution. Regrettably, this is not a good idea. A pipe fracture or hole might enlarge with time, causing a leak larger than your patch can manage.

Instead, think of this as a stopgap measure until a professional plumber arrives.

Immediate Leak Repair by Advanced Plumbing and Drains

Check Superior Plumbing and Drains before looking for “water leak repair near me.” We’ve been serving Charlotte, NC, for over 30 years and provide emergency services to safeguard your property from the consequences of leaky pipes.

Do you have a leaking pipe in your home? For assistance, please get in touch with us. We’ll dispatch a specialist right away!

Leave a Reply

Your email address will not be published.

Plumbing For Residential Use

The majority of individuals are unconcerned with the water pressure in Salt Lake City. Those who have presumably contended with low water pressure make showering and other domestic duties difficult.

On the other hand, high water pressure is a less typical issue in a home’s plumbing system. In most American houses, the water pressure is between 45 and 55 PSI. Any pressure of more than 60 PSI creates plumbing issues and pipe damage.

Causes of Excessive Water Pressure

While low water pressure is obvious right away, excessive water pressure is more difficult to detect:

Leaking faucet: High water pressure might cause a faucet to leak. If the problem only occurs at a certain time or when using a different fixture, high water pressure might be the cause.

Pipes that scream: Water hammers are caused by high water pressure. The hammering sound produced when water blast waves abruptly halt called “hammers.”

Rattling pipes: The water pressure may be too high if the pipes rattle around when carrying water.

High water bills: Bills rise because a high water force distributes more water.

Water spurts when opening on a faucet, continuously running toilets, and excessive plumbing sound are further indicators.

How awful is it when there’s a lot of water pressure?

High water pressure has several negative consequences for your water pipes, among other things. To begin with, your plumbing system may squander your water supply, perhaps increasing your expenses by 30%.

Second, water-using appliances might be severely damaged. Dishwashers and washers are normally set to the lowest possible water pressure. High water pressure can lead to an early breakdown, resulting in costly repairs. Frequent plumbing inspection services might help you avoid these problems.

Finally, excessive water pressure, particularly in old pipes, can cause significant damage. It might make your pipes more prone to breaking and cracking. Water leaks might result in waste and harm in the end.

Addressing Water Pressure Issues

High water pressure is comparable to those high blood pressure. It can cause serious and irreparable harm if you don’t catch it early.

Factors beyond your control can cause high water pressure. The local freshwater system, for example, might be delivering high-pressure water into your house. On the other hand, plumbing repair service providers may assist in resolving this issue by placing a water pressure limiter at the water main.

Experts are also the ideal people to deal with pipe scaling and clogs. Your local plumbers can repair any pipes or faucets that have been damaged by excessive water pressure.

Do you require assistance in resolving a high water pressure issue?

It’s better if you never neglect a high water pressure issue. This problem, which poses a serious threat to pipelines, devices, and the entire plumbing system, demands your quick attention. Think about hiring a water inspection service to guarantee that your home’s plumbing system is excellent.

Leave a Reply

Your email address will not be published.

Have you ever had the experience of water escaping from your shower head as you were filling your bathtub in Salt Lake City?  If your tub and shower are linked, and the plumbing is in good working condition, just one area of the tub or shower should activate and operate at a time. If the issue is not resolved, you may spend more on your water bill and lose water pressure from your shower head as time goes on.

When filling the bathtub, why is water coming out of the shower head?

The most frequent reason for shower head leaks when filling the bathtub is a problem with the diverter valves, which are responsible for diverting water from the bathtub tap to the shower head and back.

There is a lever on the nozzle of your tub that is used to switch the water source and ensures that water begins flowing out of your shower head when you pull it. So, if water escapes without you pressing the handle, it’s a sign that your shower diverter valve is not working.

The valve operates on the premise of diverting or redirecting water such that it goes to the shower head rather than down to the tub faucet.

To stop the water from flowing out of the pipe, we need to turn the diverter within the tube, which prevents it from flowing out of the tube by pulling the knob on the tub’s faucet. The diverter may wear down over time, leading to water spilling out of both sections simultaneously.

One piece of advice that might help you protect your diverter and guarantee it continues to work correctly is to redirect water flow to the bathtub spout after you’ve completed showering before turning off the faucet.

To resolve this issue, unscrew the valve and clean and clear any build-up that may be preventing the diverter from operating correctly.

Shower Diverter Valve Repair

This is a simple issue that can be resolved quickly. If you’re not sure you can do it yourself, we suggest hiring an experienced plumber to perform it for you.

To begin, remove the cover from the tub’s faucet. You should be able to access the diverter valve after lifting the grip. Untwist the nut, as well as the washer and screw, of the shaft. After that, be sure to examine them and, if necessary, replace any that are worn out.

Remove any dirt or sludge from the valve with the tiny wire brush soaked in vinegar. First, install the dry valve and turn on the faucet to see whether water is still flowing out of the shower head when filling the bathtub.

If there is too much junk after you’ve checked it and need to remove it entirely or think it’s broken, you could need a new valve.

Conclusion

To summarize, you don’t need to be a professional to inspect and repair a problem in your bathtub. We discussed what causes this issue and how to resolve it in this post. However, if you have a more serious problem or issue, you should call a professional plumber who will come out and repair it for you.

Leave a Reply

Your email address will not be published.

It’s sometimes more straightforward for homeowners to solve problems on their own. Minor, simple repairs provide customers with a greater understanding of their home’s fixtures and appliances and a feeling of achievement while removing the dread associated with more extensive undertakings.

While toilets, sump pumps, and sewage lines provide some unexpected difficulties, there are spots on sinks and bathrooms where homeowners may quickly and effectively discover and correct problems. Most of the time, it’s about having the correct component on hand to fix the problem rapidly. These are the components to have at home for rapid bathtub part replacements for homeowners eager to solve problems themselves and ready to get a bit filthy to handle bathtub troubles before they become a big problem.

O-Rings and washers

Rubber washers and O-rings are vital components to have on hand, not just for the tub but also for sinks, since they fit in between tub sections and other fixtures. Having a range of sizes can be beneficial, but be sure to stock up on dimensions for the bathtub outflow and valve assembly, especially (behind and within the handle).

Handles and Spouts When it comes to handles, having a replacement set of handlebars and spouts on hand is a good idea if one of the existing set’s pieces breaks. Switching out these elements is also a fast method to refresh the appearance of a bathtub to line it with the bathroom better.

Gaskets

The gasket is a little rubber ring that lies within the drain, behind the faceplate, and is comparable to washers. Gaskets may dry up and shatter as they age, resulting in leaks. Having a spare on hand ensures that an old gasket may be swiftly replaced before a bit leak becomes a major one.

Screws, nuts, and bolts

Always have backups of the tiniest, most critical connecting components in every fixture. When a nut, screw, or bolt breaks, wears out or becomes stripped, having the proper nut, screw, or bolt-on hand means refastening or resolving a problem immediately, rather than delaying or making an emergency trip at an inconvenient time.

Drains

A backup drain, which may be bought in kits, is essential. If anything goes wrong with the present drain, such as too much hair or debris obstructing it, having a functional backup drain on hand ensures that the tub can be used again. Many tubs can also accommodate several sorts of drainage, so if your present setup isn’t working, try upgrading to a model with a different drain type.

Finding a secure storage space for a handful of extra components is more straightforward than a leaking tub, temperamental tub handle, or flooded bathroom, even if it involves coming up with novel and inventive methods to keep the goods. Even yet, if the prospect of changing a bathtub component is too overwhelming, homeowners can feel free to seek assistance. There’s nothing wrong with enlisting the help of a specialist to guarantee that the task is completed correctly and without anxiety or stress.

Contact the experts at Thornton Heating and Plumbing, if you have a plumbing problem that you don’t think you can handle. 

Their first focus is to meet the demands and expectations of their clients. And they go to great lengths to guarantee that their customers are constantly satisfied with their services. They’ve tailored their services to fit your budget, tastes, and requirements.

Every house in which they operate is handled with care, compassion, and a commitment to putting a smile on every customer’s face. They understand that each house is unique. As a result, you can rely on them for boiler repairs and replacements that are personalized to your property.

The skilled professionals walk customers through simple repairs or perform the work themselves, utilizing their knowledge and skills since they have over years of experience. Don’t let a leak go unnoticed – contact the experts at Thornton Heating and Plumbing now at 801-565-7948, or arrange an appointment online from your mobile or desktop computer!

Thornton Heating and Plumbing provide high-quality heating and cooling solutions tailored to clients’ requirements in Salt Lake City. Bryant Heating & Cooling Systems’ products’ reliability, convenience, and effectiveness readily connect with Duane Blanton’s desire to deliver excellent customer service. Ask a Salt Lake City Plumbing, Sewer, Heating, and Cooling professional about the benefits of replacing your home’s heating and cooling system with a new Bryant system now!

Leave a Reply

Your email address will not be published.

While tankless water heaters are becoming increasingly popular (particularly in bigger houses in Salt lake city), traditional tank versions are still widespread and unlikely to disappear anytime soon. So, how can you figure out which one is the greatest match for you? It’s clear. Begin with the fundamentals.

What Units is a Water Heater’s Capacity Measured In?

First and foremost, Water heater strength is calculated in gallons, where the imperial system is used. Between 40 and 60 gallons is the most frequent capacity.

The holding capacity of a water heater is evaluated in Liters in countries that use the metric system instead.

Sizes of Water Heaters in Storage Tanks

If you choose a traditional storage-tank water heater, there are two factors to consider:

a. Peak Hour Demand – Your family’s quantity of hot water used in a busy 1-hour period.

b. The First Hour Rating (FHR) of a Water Heater – The amount of hot water the water heaters can generate in one hour.

You’ll need to perform some calculations to ensure you have the proper size water heater for your house. In one hour, add up the hot water requirements of all the hot water gadgets you expect to use in your home.

Add the average liters of hot water per use of these appliances to the chart above. Let’s assume you take two showerings and then start the washing machine. The total amount of hot water required is 72 gallons.

When you run out of hot water during that 1 hour, you’ll need a hot water system with a “first-hour rating” of at least 72 gallons. In most circumstances, a 50-gallon tank water heater would be required in this situation, as most 40-gallon versions have a lower FHR.

An average household of four uses 200-400 gallons of water daily for dishes, showers, laundry, and other activities. A couple in an apartment may use half of that, but a family of six would consume 600 gallons or more each day.

The size of the tank is determined by how much water you consume every day, not by the number of people in your home (some individuals use more water than others). The distance between the water heater and the exit is also essential.

A big family who resides in a house with the main bathroom on the other end of the house from the water heater will require a larger tank than a family of the same size who lives in a house with the most frequently used water outlets near the hot water system.

Sizes of Tankless Water Heaters

Tankless water heaters are useful for larger family members when you need to draw hot water from multiple sources at the same time or when you have a large Jacuzzi tub in your restroom. Because of their compact size, hiding them isn’t difficult as it may be with specific tank models.

The capacity of tankless devices is measured in gallons per minute. When all you want to understand is what capacity tankless water heater do I need, there are three simple steps to determine your house’s proper size.

Add together all of the hot water you’ll be using simultaneously. You want to go in the shower while also running the dishwasher. A shower would use 1.5 to 3.0 gallons per minute, whereas a dishwasher would use 1.0 to 3.0 gallons per minute. That’s 6 gallons per minute on the top end.

The average groundwater temperature varies depending on where you reside. In general, if you live in the north, you’ll need a more powerful tankless device than someone who lives in a warmer environment because heating colder groundwater requires more effort. You can choose which tankless water heater is the suitable size for your home once you’ve determined the gallons per minute and the acceptable groundwater temperature. Once you’ve decided on a brand, most tankless water heater manufacturers will include a water heater size calculator on their website and model suggestions.

Whether you choose a tank or a tankless system, keep in mind the long term and consider getting the next size up if your family expands suddenly (or if you are single, you decide to get married).

Choosing the proper size and kind of water heater doesn’t have to be a time-consuming procedure. You’ll have the ideal size water heater for your house in no time with a bit of math and personal preference.

Leave a Reply

Your email address will not be published.

We can HELP you solve your Plumbing, Radiant, Snowmelt, and Boiler Services

For a limited time only!

Get $75 off a New Water Heater

Let us install your water heater. Our licensed, insured pros can handle it.

Signup now to get our Water Heater Special our calendar is filling up fast. Feel free to call us if you have any questions 801-565-7948.

WElsome